2022-11-08 Mechanical Meeting Minutes

Battery Mount Design

• https://uwaterloo.atlassian.net/wiki/spaces/UWRT/pages/43169185949

• PDR one done, pending some changes

•  

• Review final PDR after mech meeting

• Get design bult by end of term

• Connect with josh about ebox

Differential Bar Investigation

• https://uwaterloo.atlassian.net/l/cp/L7Amn3RD

• No updates

• N/A

Drivetrain Weight Reduction

• @Austin Tailon Huang update CAD

• Preliminary mass budget information set up

• Focus on ideas after the ebox pdr review

Rover Comms Tower / Gimbal Mount

• https://uwaterloo.atlassian.net/wiki/spaces/UWRT/pages/43199430677

• PDR 1 completed

• Preliminary CAD for new design location

EBox Redesign

• Filled in some criteria/constraints & design concept research on PDR doc

• Messaged Logan about component list, will discuss with him during electrical meeting tomorrow

• fill component list doc

• continue researching design ideas/create prelim sketches

• schedule a PDR

A1 Base Plate

• • Pushed to GrabCAD

  •  

• Get CAD reviewed

• Order stock

• Machine new part

A4 Sensor Mount

• • No updates; needed and arduino

• Test proximity switches to verify usage

• Proximity switches testing today

Arm Design Research

• N/A

• Meet with @Austin Tailon Huang

A5/A6 - Shaft Redesign

• • Ticket created

  • Looking at encoder shafts right now

  • Review shaft redesign with @Austin Tailon Huang

• Machining key seats soon

A5/A6 - Structural Weight Reduction

• @Austin Tailon Huang revisit this task when shaft redesign and encoder protection are completed.

• N/A

A5/A6 - Encoder Protection

• • Printing enclosure design

• Will test and install tomorrow

• Good for new members

Joint Testing Plans

• Need to develop plans to measure torque output, backlash, speed, efficiency, current draw for each arm joint

• Plus verify end stop functionalities

• Will start after midterms, when odrives work

• Good for experienced members who are familiar with motor properties and motor controllers

@Chanpakorn Chaiklahan

Arm Camera Mount

• Select a suitable camera to be mounted on the wrist

• Requires communication with SW, simpler mechanical design task

Circle back on this one

Science Assembly

• Additional components ordered from McMaster

• new t-slot parts are being machined

• Risk of binding for air manifold mechanism

• continue assembling main frame and air manifold

• tested binding and servo motor that lifts the air manifold

Science Sensor Dino Mount

• Dino mount is completed

• Parts are printed

•  

• Assemble, test and install dino mount

Air Manifold Assembly

• • @Austin Tailon Huang

• Air manifold assembled

3D Sensor Head Mount

• Testing on CO2 sensor completed

  • CO2 sensor can work when submerged or in a vacuum

• Clarify what she means by vacuum

• She thinks 15sec submerging can work

Remachine Science Dirt Nozzles

• Revisit when science is fully assembled

Fix Linear Carriage for Science Mechanism

• Nut superglued in place

• Initial solution did not work,, reassign and redesign

Design Mount for Science PCB

• Good for new members, learn about PCB packaging

• Easier design task

Erin Devlin

Mechanical Engineering 2A

Dahui Kang

Mechatronics Engineering 1A

Toni Zeng

Mechatronics Engineering 1A

Lucas D’Elia

Mechatronics Engineering 2B

David Choi

Mechanical Engineering 2A

Megan Chang

Mechatronics Engineering 2B

Santiago Zea

Mechanical Engineering 2A

Yuming He

Mechatronics Engineering 1A

Henrique Rodrigues

Mechatronics Engineering 1A

Aathithan Karunakaran

Mechatronics Engineering 1A

Shivraj Singh Vishnoi

Mechatronics Engineering 2B

Shabd Gupta

Mechatronics Engineering 1A