@Ari Wasch

BMS

• Start working on some documentation

David Choi

RS422 / Comms

Any update on the DD Current Sense part selection?

• Did reading on 7 seg – comparators

  • Couldn't find a good example online

• Did some comms readings

@Farris Matar

PDB/BMS

• SPI Peripheral boards were shipped to the bay this Monday

• PDB Rev 4 documentation written up (Revision 4 - S2022 (Rishith Bomman))

• Work session this weekend in the bay to assemble and potentially test the SPI Peripheral boards

@Joshua Harper

E-Box

@Logan Hartford

Multiphase Buck Converter

• Ordered

  • 3V3 bucks for the BMS

  • 5 computer power cords

  • 2 scaples with blades

• Worked with @Wolfgang Windholtz (Deactivated) and tested the PDB

  • 5V has been fully tested and works, though it is very noisey

• Work Session Stuff:

  • Fully test PDB

  • Assemble and test more RS422’s

• Meet with Olivia, David and Yuchen and discuss DD current sense project

  • Should start meeting weekly on this and make some progress

• Will do 17V basic testing on Friday, then @Wolfgang Windholtz (Deactivated) and @Farris Matar can help with the more advanced stuff on Saturday

• Grab SPI boards

• Verify 17V load sw with N-CH

Muhammad Tanveer

Comms

Any update on comms? Any update on the BMS back up?

@Olivia Markham (Deactivated)

BMS / DD Current Sense

Any update on the DD Current Sense part selection?

• focusing on finishing school work and studying for exams for now

• Keep track of progress updates here: Current Sense Display

@Rishith Bomman

PDB

Any updates?

@Wolfgang Windholtz (Deactivated)

Science / Support

5V testing

• Probed pdb on 5V line

  • 12V pk-pk ripple on sw node

  • ripple coupled to 48V and gnd power plane

  • input ripple of 12v pk-pk

• Added snubber to gate of fet

  • added a bit out output capacitance

  • added a bit of input capacitance

  • helped a bit

• odrive support

• PDB testing/support

@Yuchen Lin

Comms

Any update on comms?

• identify the end of term goal

• setting up site to site communication under vpn

• bench testing and vertifying the point to point communication

• A little bit busy on school work.

• Please update the comms ticket with developments in the progress updates section, should only take 10 min Comms

• Finish setting up site to site communication

• verify the test

• update the document

• will be holding a meeting for comms next term.

PDB

@Rishith Bomman /

@Farris Matar / Rayaan

PDB Rev4 - Design and Assemble the PDB

Dec 19, 2022

• Two PDBs have been assembled, one of them is prettier than the other

• Basic non-performacne and non-firmware tests have been done

• Looking like another revision may be necessary, we determine for sure after tests are fully complete

HIGH

Multiphase Buck

@Paul Kokhanov / @Logan Hartford

Multiphase Buck Converter Rev 2 - Design and Assemble the Buck Converter

DISCONTINUED

• Tested over reading week, something is wrong, haven’t determined the root cause of the issue

• An off the shelf back up has been sourced

HIGH

BMS

@Joshua Harper / @Ari Wasch / Olivia

BMS - Design and Assemble the BMS

Apr 19, 2023

• One BMS has been assembled

• Basic non-performacne and non-firmware tests have been done

• An off the shelf replacement is being sourced

HIGH

Comms

@Yuchen Lin / @Logan Hartford

Comms

Oct 31, 2022

• New edge routers have been purchased and configured

• We are able to send data

• Looking to do a range test

HIGH

Science

Science - Assemble & Test

Apr 19, 2023

• Need one or two people to own the assembly and testing of the science boards and work with @Ivan Lim and @Wolfgang Windholtz (Deactivated) to ensure the board is ready for competition.

• Found two assembled boards but none of the parts if @Ivan Lim / @Wolfgang Windholtz (Deactivated) have any ideas please let me know. Otherwise we’ll just order more parts.

• @Ivan Lim / @Wolfgang Windholtz (Deactivated) Both of the assembled boards are missing a lot of parts, do the boards have a bunch of population options?

MEDIUM

SPI LVDS

@Farris Matar

SPI LVDS - Assemble and Test

Apr 19, 2023

• Need one or two people to own the assembly and testing of the SPI LVDS boards.

• There are assembled host boards in the bay

• Parts and boards have been ordered for the peripheral boards

MEDIUM

RS422

David Choi / @Farris Matar

RS422 - Assemble and Test

Apr 19, 2023

• @Farris Matar verified the design and was able to send data using the boards

• 3 Boards have been assembled and tested

• There are parts and boards for 5 more in the bay

MEDIUM

LED Matrix

LED Matrix 2022/23

Apr 19, 2023

• LED matrix has been located

• Should work, just needs power and a PWM signal

MEDIUM

Digital Display Current Sense Board

@Olivia Markham (Deactivated) / David Choi / @Yuchen Lin

Current Sense Display

Apr 19, 2023

• Currently in the part selection phase of the project

LOW