@Ari Wasch

BMS

• BMS documentation

  • List of fucntionalities, specifications etc

  • List of design choices

  • IC selection

  • Anything else that might be useful for someone picking up the project down the line.

David Choi

RS422 / Comms

Any update on the DD Current Sense part selection? Update on setting up PCs?

@Farris Matar

PDB/BMS

• SPI Peripheral parts in the bay, SPI peripheral boards are in transit and should arrive this week

• Will be able to go to the bay next Saturday (not this one) to assemble and possibly test the SPI boards (i.e. with an Arduino)

• PDB documentation

  • List of fucntionalities, specifications etc

  • List of design choices

  • IC selection

  • Anything else that might be useful for someone picking up the project down the line.

@Joshua Harper

E-Box

• ordered BMS/RS422 parts

• BMS documentation

  • Add to the document @Ari Wasch creates

  • Changes made during your revision and reason for the changes

  • Current state of the design (functional, non-fucntional, un-tested)

@Logan Hartford

Multiphase Buck Converter

• Went to the bay and supported @Rishith Bomman and @Yuchen Lin with testing the PDB and BMS respectively

  • Both are tested up to to the point where firmware will be needed or where performance is concered

  • Bunch of footprint problems with the PDB

  • @Farris Matar were the load switched tested in the last revision? They were behaving weirdly

• Dayton team has not gotten back to me about setting up a meeting

  • Do we have specific questions that we could ask another team?

  • Do we need another meeting soon?

• Ordered:

  • 4 sets of tweezers

  • 3 more power leads

  • 9v batteries

  • 16 guage wire

  • Bigger paste scrappers

• Updated project tickets and meeting template

• Work Session Stuff:

  • Assemble another buck

  • Assemble another BMS

  • Assemble and test more RS422’s

• Meet with Olivia, David and Yuchen and discuss DD current sense project

  • Should start meeting weekly on this and make some progress

Muhammad Tanveer

Comms

Any update on comms? Any update on the BMS back up?

• Have we ordered the backup BMS yet?

@Olivia Markham (Deactivated)

BMS / DD Current Sense

Any update on the DD Current Sense part selection?

• Keep track of progress updates here: Current Sense Display

@Rishith Bomman

PDB

Any updates?

• BMS documentation

  • Add to the document @Farris Matar creates

  • Changes made during your revision and reason for the changes

  • Current state of the design (functional, non-fucntional, un-tested

• Please add all off the footprint issues that you found during testing to a document in the design folder for PDB on confluence

@Wolfgang Windholtz (Deactivated)

Science / Support

@Yuchen Lin

Comms

Any update on comms?

• Is the comms documentation up to date with current development?

  • if so, I will review it this weekend

• Please update the comms ticket with developments, should only take 10 min Comms

PDB

@Rishith Bomman /

@Farris Matar / Rayaan

PDB Rev4 - Design and Assemble the PDB

Dec 19, 2022

• Two PDBs have been assembled, one of them is prettier than the other

• Basic non-performacne and non-firmware tests have been done

• Looking like another revision may be necessary, we determine for sure after tests are fully complete

HIGH

Multiphase Buck

@Paul Kokhanov / @Logan Hartford

DISCONTINUED

• Tested over reading week, something is wrong, haven’t determined the root cause of the issue

• An off the shelf back up has been sourced

HIGH

BMS

@Joshua Harper / @Ari Wasch / Olivia

Apr 19, 2023

• One BMS has been assembled

• Basic non-performacne and non-firmware tests have been done

• An off the shelf replacement is being sourced

HIGH

Comms

@Yuchen Lin / @Logan Hartford

Oct 31, 2022

• New edge routers have been purchased and configured

• We are able to send data

• Looking to do a range test

HIGH

Science

Apr 19, 2023

• Need one or two people to own the assembly and testing of the science boards and work with @Ivan Lim and @Wolfgang Windholtz (Deactivated) to ensure the board is ready for competition.

• Found two assembled boards but none of the parts if @Ivan Lim / @Wolfgang Windholtz (Deactivated) have any ideas please let me know. Otherwise we’ll just order more parts.

• @Ivan Lim / @Wolfgang Windholtz (Deactivated) Both of the assembled boards are missing a lot of parts, do the boards have a bunch of population options?

MEDIUM

SPI LVDS

@Farris Matar

Apr 19, 2023

• Need one or two people to own the assembly and testing of the SPI LVDS boards.

• There are assembled host boards in the bay

• Parts and boards have been ordered for the peripheral boards

MEDIUM

RS422

David Choi / @Farris Matar

Apr 19, 2023

• @Farris Matar verified the design and was able to send data using the boards

• 3 Boards have been assembled and tested

• There are parts and boards for 5 more in the bay

MEDIUM

LED Matrix

Apr 19, 2023

• LED matrix has been located

• Should work, just needs power and a PWM signal

MEDIUM

Digital Display Current Sense Board

@Olivia Markham (Deactivated) / David Choi / @Yuchen Lin

Apr 19, 2023

• Currently in the part selection phase of the project

LOW