RICOH - Adding RICOH Printers Directly to Windows Device

Purpose

To add the printer you’ll need it’s IP Address https://nxsartsapp.uwaterloo.ca/Reports/AuthenticatedPrinterInfo/ArtsPrintersMain.html or https://uwaterloo.atlassian.net/wiki/spaces/ACOHD/pages/44011979207

Procedures

 Instructions

1. Verify the RICOH Printer model and download the corresponding PCL6 Driver Ricoh Driver:
   
   

   1. Model = IM C3010 - URL: IM C3000/C3500 Downloads | Ricoh Global
      
      

   2. Model = IM C5000 - URL: IM C4500/C6000 Downloads | Ricoh Global
      
      

   3. Model = IM C400F - URL: https://support.ricoh.com/bb/html/dr_ut_e/rc3/model/imc300/imc300.htm
      
      

   4. Model = IM 550F - URL: https://support.ricoh.com/bb/html/dr_ut_e/rc3/model/im550/im550.htm
      
      

   5. Model = IM 5000 - URL: https://support.ricoh.com/bb/html/dr_ut_e/rc3/model/im2500/im2500.htm
      
      

      Open

      

2. Run to unzip in your c:\temp folder
   
   

   Open

   

3. Open Settings>Bluetooth and Devices and click Add Device

   Open

   

    

4. Click Add Manually

5. Click Add printer using IP address or hostname then click Next:

   Open

   

    

6. Add the Select Device type as TCP/IP, add the IP address, uncheck Query the printer … and click Next:

   Open

   

    

    

7. From the Drop Down menu select the Ricoh C Model:

   Open

   

    

8. Click Have Disk on the next popup and browse to the location you unzipped the Ricoh drivers:

   Open

   

    

9. Under the r01294L1a folder > select disk1 > select r4600.inf > Open
   
   

   Open

   

10. Choose PCL6 V4 Driver for Universal Print and click Next
    
    

    Open

    

11. Rename the printer to its hostname and click next:

    Open

    

     

     

12. Make sure that the Do not Share radio button is selected. Click Finish on the next popup

 Related articles