Science - Remachine the air manifold nozzle heads

Contributor Log

Name	Contribution

Name	Contribution
@Chanpakorn Chaiklahan	Task Manager
@Ryan Mark	Owner

Task Description

The nozzle heads are will be attached at the bottom of the air manifold mount and allow the dirt particle to enter the test tubes.

The current parts cannot fit into the test tubes and need to be re-machined (turn down the nozzle OD)

Review the CAD of the test tube and the nozzle heads

Take measurements of the physical test tubes and the nozzles

Create drawings and modify the CAD

Remachine the nozzles in the machine shop

Verify if the nozzles fit into the test tubes

-