Motor Driver Specing
- Alex Szabo
Project | Task | Project Manager |
|---|---|---|
Arm | Motor + Motor Driver Spec | @Alex Szabo |
Task Description
Need for project: For our arm, we have 6 axes + and a gripper at the end. The mech team has given motor requirements for the arm, so it is your role to determine if the current motors we have meet the specs given by mech, what motor drivers we can use and test the amount of torque these motors can handle.
Goal: Determine if the current motors + Odrives work. If they do not find new motor drivers, test them and iterate until we find suitable motors and motor drivers for our needs.
Requirements:
Supporting Resources:
Constraints
Constraints | Author | Appended Date |
|---|---|---|
N/A | N/A | N/A |
Subteam Contacts
Subteam | Contact | Description |
|---|---|---|
Software | Alex Szabo: | For CAN Wrapper Questions |
Mechanical | Yu-Ming He @Yu-Ming He | For more info about motor specing |
Firmware | Josh Magder: @Josh Magder | For CAN / general firmware questions |
Assignees
Assignee | Monday Task | Date |
|---|---|---|
XX | Jul 21, 2024 |
Task Progression/Updates
Author: @person: 2024/05/04
UPDATE
Bullet points for updates
Communication
Communication must be proactive. The subteam lead will check in with you at least once a week to get a progress report update, but it is very important that when a roadblock occurs, you reach out for help and update Monday with a blocked or stuck status.
Blocked: for tasks that have dependencies on other projects that have not been completed yet
Stuck: you are unable to get something working.
Documentation
Upon making progression updates, please update the documentation page for this project with any critical information and resources.
Add documentation to this document:
Documentation Guide: SW/FW Documentation Guideline