/
Jetson Xavier AGX Backup
Jetson Xavier AGX Backup
Backing Up the Jetson
SSH into Jetson using the command
ssh uwrt-agx-xavier@192.168.55.1
Make the file system read-only
echo u | sudo tee /proc/sysrq-trigger
Still on the jetson, through ssh, transferring an image of full internal memory hard drive over ssh to host PC:
sudo dd if=/dev/mmcblk0p1 | ssh user@YOUR_IP 'sudo dd of=/path_to_save_folder/image.raw'
This will create on your PC a 30Gb file containing a full image of the Jetson. you can now turn of jetson.
Now on you pc you can convert the .raw image to a .img image file:
Restoring the image file
Boot the Jetson on restore mode (power and middle button for 5 sec), connect it with usb to the PC.
copy in this bootloader folder your backup img file and rename it system.img
Resources:
, multiple selections available,
Related content
ROS2 on Jetson AGX Xavier
ROS2 on Jetson AGX Xavier
More like this
JETSON - Install SSD Upon Arrival
JETSON - Install SSD Upon Arrival
More like this
JETSON - Test Running [Not completed]
JETSON - Test Running [Not completed]
More like this
JETSON - Create Jetson-Nucleo CAN Interface [Not completed]
JETSON - Create Jetson-Nucleo CAN Interface [Not completed]
More like this
Software To-dos/Roadmap (list)
Software To-dos/Roadmap (list)
More like this
Upgrade Jetson
Upgrade Jetson
More like this