Using AV equipment in BMH-3119

Open

BMH-3119 has a TV, a podium computer with a meeting Owl, and a long HDMI cable at the podium that can be used to connect a laptop.

1. Using the computer in the room

2. Using your own computer - connected by HDIM cable

3. Using your own computer - wirelessly mirror your display

4. Using video conferencing

Using the computer in the room (Podium)

1. Power on the TV using the remote

2. Tap the spacebar to wake up the computer

3. Sign in to the Windows computer using your UW userid and password

4. By default the TV screen will be an extension of the desktop. This is useful for PowerPoint presentations when you want to see speaker notes at the podium. If you would rather have both screens show the same content hold down the Windows key and tap the P key and select Duplicate as the option.

5. When done:

   1. Sign out of the podium computer

   2. Power off the TV using the remote

Using your own computer - connected by HDMI cable

1. Power on the TV using the remote 

2. Get your computer ready to present - powered up, signed in and ready to go.

3. Connect HDMI cable from the side of the podium to your computer. If you don’t have an HDMI display port (or adapter) see the Reception area in Dean’s Office (BMH-3104) or Health Computing (BMH first floor hallway to SunLife auditorium).

4. Wait for the source to be detected by the TV

5. Using a Mac? We recommend setting your display preference to “Scaled” at 1080P or to the same size as your laptop screen.

6. When done:

   1. Disconnect the HDMI cable from the laptop, wrap it in a loop and leave it on the shelf at the podium

   2. Power off the TV using the remote

Using your own computer - wirelessly mirror your display

Also refer to: BMH-3119 - Using Ditto wireless screen mirroring

1. Power on the TV using the remote 

2. Log on to the podium computer (or get someone else to log in to the podium for you)

3. Launch the Ditto Receiver application on the podium desktop

4. Back at the laptop, use a web-browser to navigate to https://connect.goditto.com and enter the room code BMH3119.

5. Follow the instructions on the webpage to connect your laptop to the in-room screen.

6. When done:

   1. Disconnect from the screen in the Ditto application on the laptop

   2. Sign out of the podium computer

   3. Power off the TV using the remote

Using video conferencing

The room has a Meeting Owl - a video/audio conference camera, microphone and speaker. After you see it, you will understand its name. The Owl is plugged in and connected to the podium computer.

RECOMMENDED: Use the podium computer for Video Conferencing in this room

1. Follow the steps in the Using the computer in the room (Podium) setup

2. Confirm that the Meeting Owl is the selected device for both audio and video in the meeting software, if having problems you may need to reboot the Owl by unplugging the power brick that is under the table, wait 15 seconds and plug back in, or rebooting the podium machine if audio issues. If after such there are still problems you can contact Health Computing (BMH first floor hallway to SunLife auditorium).

Use your own computer for Video Conferencing

1. Follow the steps for Using your own computer - connected by HDIM cable

2. Unplug the USB cable marked “OWL” from the back of the podium computer and plug it into a USB port or adapter on your computer.

3. Confirm that the Meeting Owl is the selected device for both audio and video in the meeting software, if having problems you may need to reboot the Owl by unplugging the power brick that is under the table, wait 15 seconds and plug back in. It will take a while to start up and then it will ‘hoot’.

4. When done your meeting, please reconnect the Owl to the back of the podium computer for the next person using the room

More about the Owl on the https://uwaterloo.atlassian.net/l/c/1fXzQu1X page