CANABLE 0.2 USB-CAN Adapter setup

Background information:

Our team current have two different model of CAN transceiver board. The one described in this document is a nice looking one because it has a USB Interface enable us directly connected the computer.

https://openlightlabs.com/products/canable-0-4

When connected to the computer, the device is flashing green and blue, and inside Windows, it is registered as a PCAN Device.

image-20240831-210736.png

First time setup: https://www.peak-system.com/PCAN-USB.199.0.html?&L=1

Follow this guide and complete all the setups

 

https://cantact.io/introduction.html

A blog post describing the history of this project: http://protofusion.org/wordpress/2015/05/the-canable-a-small-usb-to-can-adapter/