MacOS 802.1x Wired Connection Authentication

Please follow these steps to authenticate and connect to the University wired network.

Note: If you are using a third-party ethernet adapter (the adapter is not from Apple), make sure it is Mac-compatible. Some adapters also require the user to install the software drivers for your specific ethernet adapter (Check with the manufacturer of your adapter). To download the drivers for your ethernet adapter, find the brand and model of the ethernet adapter, search “[Adapter brand] [Adapter model] drivers” in a search engine, then download and install the drivers.

On your Mac, click the Apple menu on the top left > System Preferences > Network.

You should now see the network screen:

2. If there is an ethernet tab (e.g. Thunderbolt Ethernet, USB 10/100 Ethernet Adapter, USB 10/100 LAN) on the list at the left side of the network tab, skip to step #4.

3. If you do not see an ethernet tab, plug in your ethernet adapter to your mac. If the ethernet tab does not appear within a few minutes, you will need to manually add the tab.

To manually add the ethernet tab:

Click the '+' sign at the bottom left of the Network window, click the drop-down list for Interface, then:

For thunderbolt-ethernet adapters, select Thunderbolt Ethernet.

For USB-ethernet adapters, select USB Ethernet Adaptor/LAN.

Click Create, then Apply at the bottom right of the network window.

4. Unplug the ethernet adapter if it is plugged in, then click the ethernet tab on the list at the left side of the network tab, click Advanced…

5. Go to the 802.1X tab and make sure that Enable automatic connection at the bottom left is enabled.

Click OK > Apply.

6. Plug in the ethernet cable to the Mac, once the sign in window for the authenticated port pops up, enter your UW credentials. For username, input your WatIAM username + @uwaterloo.ca, and your UW account password for the Password input. Click OK.

7. After you input your credentials, you should automatically establish a connection after 10-15 seconds. If it is not connecting, try un-plugging & re-plugging in.

Related articles

Need help?

Article feedback