Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Current »

There are 2 default printers you can set up. One is for general printing, and the other is for printing labels.

Default Printer (general printing)

  1. Log into Accuro.

  2. Click Accuro main menu (red bullseye in the lower-left corner).

  3. Click File then select User Preferences.

  4. In the Defaults section, click the magnifying glass beside the Default Printer field.

  5. Click the desired printer then click Select.

  6. Click Apply and OK to close User Preferences.

Default Label Printer (labels)

  1. Click Accuro main menu (red bullseye in the lower-left corner).

  2. Click File then select User Preferences.

  3. Click the Labels section in the lefthand menu bar.

  4. Click the ellipsis next to the Default Printer field and select the printer.

  5. In the Paper dropdown, select the appropriate paper e.g. the Lab needs to select “Lab Labels”.

  6. Click Apply and OK to close User Preferences.

  • No labels