Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

Due Date:

Contributor Log

Name

Contribution

Chanpakorn Chaiklahan

Task Manager

Skills

  • Machine shop

  • Mechanical CAD modelling and drafting

Task Description

The nozzle heads are will be attached at the bottom of the air manifold mount and allow the dirt particle to enter the test tubes.

The current parts cannot fit into the test tubes and need to be re-machined (turn down the nozzle OD)

Task Breakdown

  • Review the CAD of the test tube and the nozzle heads
  • Take measurements of the physical test tubes and the nozzles
  • Create drawings and modify the CAD
  • Remachine the nozzles in the machine shop
  • Verify if the nozzles fit into the test tubes

Prerequisites

-

Progress Journal

  • No labels