$customHeader
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Follow these instructions to authenticate to the 802.1x network using an Ubuntu device.

  1. Click on the Network Manager icon

  2. Select the ethernet connection you are attempting to authenticate to, and then select Settings

  3. Click the gear icon beside the connection you are editing

  4. Navigate to the Security tab

  5. Turn on the toggle beside 802.1x Security

  6. Configure the settings to match the following:

  • Authentication: Protected EAP (PEAP)

  • Check the No CA Certificate Required box

  • PEAP version: Automatic

  • Inner Authentication: MSCHAPv2

  • Username: your username@uwaterloo.ca

  • Password: your WatIAM password

7. Select Apply

You should now be authenticated to the 802.1x wired network.

Need help?

Contact the IST Service Desk online or 519-888-4567 ext. 44357.

Article feedback

If you’d like to share any feedback about this article, please let us know.

  • No labels
$customFooter