notes
Link to the slides here
flip rocker and bogie end
take a look at the flexing of the top plate
10/15 kg arm on the plate may flex
add some clamps onto the carbon fiber rods
carbon fiber
make additional pieces to test and play around with
bigger factor of safety for carbon fiber
validate the carbon fiber
bond strength between carbon fiber and aluminum is variable
glass beads to fill the gap between epoxy and aluminum to prevent touching
avoid carbon fiber touching aluminum
strength testing on the instron on campus
google this to get some good data
bonding related to formula sae suspension arm
measure the carbon fiber tubes before manufacture
flip the bolt around in that block so it can be disassembled
chassis will react to the arm movement whole thing will wiggle with arm movement - be aware of that
pem nut some of the aluminum sheet metal parts - smaller detail
flanged hex blots to eliminate washers no need for socket heads - small detail
https://dspace.mit.edu/bitstream/handle/1721.1/74433/813136157-MIT.pdf
https://www.3mcanada.ca/3M/en_CA/p/d/b40066431/
https://agile-manufacturing.com/markforged-composite-materials/