Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Next »

 Program a Number to a Button (Speed Dial)

  1. Push one of the six programmable buttons on the sides of the LCD display.

  2. Enter the number you wish to dial when you press that button and then press the button again..

    • The number will be stored and the label will show the number by default.

    • If you wish to change the label to something else (e.g., the person’s name) follow the instructions below.

 Change the Label for a Programmable Button

  1. Press the Services button.

  2. Use the Navigation arrows to:

    1. Select Telephone Options and press the Enter button.

    2. Select Change FeatureKey Label and press the Enter button.

    3. Select Change FeatureKey Label again and press the Enter button.

    4. Press the programmable button for the label you wish to change.

    5. Use the 4 buttons at the bottom of the LCD display (Select, Delete, Clear, More…) and the number pad to set the label for that button as you want it.

    6. Press the Services button again to save the label and return to the main menu.

    7. Repeat the above for each of the labels you wish to change.

Remember to add “6” to the beginning of each number that is outside the University so that it knows you are dialing an outside number and not just an internal extension.






  • No labels