| Member | Update | Action Items |
|---|
| Emily Adam | - P0105
- Fit troubleshooting
- Orders, packages, very fun
| - Review assembly drawings
- Meet with Olabisi (battery mount → think about how we're machining this), and with Thomas (ebox)
- Buy stock for final parts (waterjet items, cnc'd part)
- Buy assembly hardware from EMS
- Differential bar spacers
- Read SAR doc :P
|
| Austin Tailon Huang | - All non sponsored orders have been fulfilled
- Reviewing drawings
- Assembled BOM for agile parts
- Availability
| - Follow up on status of SKF, Misumi and Strain wave gearbox
- Meet up with teams who will be leading joint/arm assembly
- Reach out to Nathan with agile bom
- Review approved drawings to sort out issues that have arisen / slipped through the cracks
|
| Max Apitz-Grossman | - Finished machine shop tracker (not sure how many people allowed at a time)
- McMaster, DFROBOT, KHK orders placed, first 2 "arrived"
| - still need to make the suspension folder clean (maybe even name sketches in template)
- order servocity BOM
- mars lander thingy
- Add Zia to confluence
|
| Ethan Cronier | ton of machining as always |
|
| Andrew Tersigni (Deactivated) | - busy but more free this week to take on sar stuff or other stuff
|
|
| Asha Mills Emmett |
| - gonna try to help with machining
|
| Elizabeth Jung | | - gonna do some more arm parts
|
Olabisi Sanusi | | - gonna meet with emily to go over battery mount
|
| Chanpakorn Chaiklahan | - motor testing rig done
- cover for diff box is done
- machined 36, 39, 239
| - maybe more machining
- replace fasteners and get an encoder for testing mount - then give to cindy
|
| Medina Colabrese | | - Drawing updates
- Get responses from Demtool about A5A6 parts for them??
|
| Jasmine Milan | - Compiled list of Servocity parts for science to be ordered
- Cleaned Folder
| - Edit bracket for camera controller
- Should be able to come up one day for more machining next week
- Open to helping with drawings
|
| Abdul Haseeb | No updates | Will probably use WatiMake to print prototype |
| Thomas Valer | - working on Odrive enclosure (mounting spot+stackable)
- ebox mounting design (early stages)
| - coming in to machine on saturday
|
| Steven Gong | |
|
| Conall Kingshott | - Machined P0044, P0008
- Waterjet P0042
- Stripped E-Box
| - Bounties
- Arm A3 Assembly???
|
| Charmaine Chun | completed 3d prints for Arm/Axis 1 (MR22-A1-P0046 → MR22-A1-P0049) | mechanical onboarding for drawings
ready to do more 3d prints! |
| Simon Gorbet | - Ready to get to work on gimbal when I get more instructions :)
- (couldn't make it to the meeting today unfortunately)
| - gimbal is coming??? its exchanging like 4 peoples hands
|
| Ryan Chan | - Finished cading mockup for cable routing clip
- cant make it to the meeting today as well sorry | - Going to machine last end effector part this weekend.
|
| Ryan Mark | - working on bounty, hopefully done by EOW
| - hopefully pick up more bounties afterwards
|
| Olivia Ye | - Machined MR22-DT-P0267, MR22-DT-P0268 and MR22-DT-P0205-Al) with Olivia Zheng
- Some tubes had issues with their ID being too narrow
| - Going into the shop tomorrow (Wednesday) to increase the ID of the tubes
- Will continue to pick up bounties
|
| Olivia Zheng | - finished assembly drawings for A30, 31,32
| - looking to pick up more bounties
|
| Gavin Mesz | - Finished p0254, working on 229
- fixed dimensions from test tube mistake
| - make more A4 parts, update tracker
- prototype new 229 for o ring
|
| Kenneth Francis | - Received feedback on A3 Drawings
| - Finishing the last few drawings for approval
|
| Kyle Ferrier | - Machining P0275 today
- Machining P0246 if possible today
|
|
David | |
|
| Sanjay | |
|
| Matthew Zhu | - Machined P0050, P0244 (Brian has it)
- Helped machine P0105
| - Going to machine P0079 and P0082
- waterjet stuff
|
| Jessica | | |
| Zia | - almost finished member training
- gonna finish shop training
| - bounties for machining soon
|