...
| Member | Commitment for Winter | Update | Action Items |
|---|---|---|---|
| a4tersig@uwaterloo.ca (Unlicensed) (Chassis) | 6-10 hrs/week? | ||
| amillsem@uwaterloo.ca (Wheel connections) |
| ||
| Emily Adam (Differential bar) | 6-10 hrs/week? | ||
| mapitzgr@uwaterloo.ca (Frame/structure) | ? |
| |
| cchaikla@uwaterloo.ca |
........we need to recruit.............
- Karan?
- Elizabeth?
New Tasks
- Everyone: finish manufacturing CAD
- Create BOM after Ethan spheel
- Start making drawings!
General Notes
- Standard tolerances for machining are +/- 0.005"
- Inside bend radii should be equal to or larger than the material thickness being
used - The simplified formula dictating the shortest flange length is 4x the material
thickness from the bend line - When designing hole locations on sheet metal, use the above 4x material thickness
from bend line rule - Holes are best drawn at mid-tolerance. This means the mid point between the range of acceptable deviation
- Holes intended for tapping in up to 1/2” thick steel should be drawn at the exact tap drill size
...