Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Due Date:

Contributor Log

Name

Contribution

Alex

Josh

Yuming


Skills

  • Insert skill 1

  • Insert skill 2

Task Description

RCA on odrive motors to determine if the ones that are performing poorly are shorted due to over voltage theory.

Please construct and document test results table and observations when doing this task.


Task Breakdown

  •  Resistance for between phases for each motor needs to be measured and recorded (3 measurements per motor, label color of phase wires) Construct test table
  •  Calibrate and run motor with odrive in CLNF loop (look at odrive documentation configs Billy sent)
  •  Observe motor performance for specific velocities and under torque, measure current output and record for each motor
  •  Very rough step 3, etc….

Prerequisites

Is the completion of this task reliant on any other tasks (across any subteam) finishing up? Please detail them here with links to associated confluence pages and a brief description on what is waiting on what.

  • N/A


Progress Journal

  • Saheed Quadri (date and name)

    • brief update on whats done and what are the next steps, photos and images and videos are preferred

  • Etc. Alex Szabo

    • Motor Testing (Motor 1, In 3D printed Case)

    • Setup: 4A max current, 24V

    • Odrive config wiped

      • odrv0.axis0.motor.config.motor_type = MOTOR_TYPE_HIGH_CURRENT #this is default anyways

      • odrv0.axis0.motor.config.current_lim = 30 # Adjust as needed

      • odrv0.axis0.encoder.config.mode = ENCODER_MODE_INCREMENTAL

      • odrv0.axis0.encoder.config.pre_calibrated = False

      • odrv0.axis0.encoder.config.cpr = 8192

      • odrv0.config.enable_brake_resistor =

      • Trueodrv0.config.brake_resistance = 2

    • Results

      • Speeds 5 - 50

      • Current remained under 1A

Speed = 50, Current vs. Time

time_vs_current_2024-07-20_20-24-23.pngImage Added

Speed = 50, Velocity vs. Time

velocity_vs_time_2024-07-20_20-24-23.pngImage Added

Note: I will have more data analysis later, just doing some in Python to get more insights.

Motor Resistances:

This was very surprising. Here's a table for more insight.

Motor 1

Motor 2

Motor 3

Motor 4

Motor 5

Motor 6

Blue-Red Resistance (ohms)

0.2

0.2

0.2

0.2

0.2

0.2

Blue-Yellow Resistance (ohms)

0.2

0.2

0.2

0.2

0.2

0.2

Red-Yellow Resistance (ohms)

0.2

0.2

0.2

0.2

0.2

0.2

Odrive Config:

View file
nameconfig_7_20_2024.json