For teaching assistants and professors connecting to the projectors in the Faculty of Environment computer labs. Each teaching lab has a slightly different setup for using a projector. Follow these tips or ask at the MAD ETIS Help Desk in advance for some help.
...
Tip | ||
---|---|---|
| ||
|
Galileo Lab (EV1 room 240)
- Logon to ENVGALILEO06. The remote control for the projector is attached to this desk.
- Use the power on button to turn on the projector – you should see the orange light go off and the green light go on as the projector turns on.
Geddes Lab (EV2 room 1002A
...
)
- Use the wall switch (located near the screen) labeled “Screen” to bring the screen down (roll the screen back up when you have finished using it).
- Turn the projector on using the power button on the remote control that is chained to the wall at the back of the room.
- You can either project from a laptop or from the computer (ENVGEDDES27 / ENV-DMC-23) in the lab that is connected to the projector. There is a toggle switch attached to the desk that lets you flip back and forth between projecting from a laptop and the desktop computer.
- To change the screen resolution, press the "AUTOPOSITION" button on the remote.
...
- There is no projector mounted in this room. If you want to use a projector it is highly recommended that you book a projector and a cart from the MAD Help Desk. You can connect the a projector to ENVMAGELLAN04 and a computer (e.g. ENVMAGELLAN12) and project on the screen at the front of the room.
...
Info |
---|
At the end of each lab session:
|