Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Replacing Safety Alarm Batteries

  1. Remove the top cover by inserting a flat head screwdriver into the slot located on the bottom-right corner and twist



  2. Move switch to the “off” position and remove the small Philips screw at the centre of the board to expose the batteries underneath



  3. Replace both batteries with CR-2025 lithium batteries. Ensure the batteries match polarity for slot they are being placed into



  4. Replace electronics board and place screw in original location
  5. Return switch to the “on” position and replace the unit cover

Ordering replacement batteries

Batteries can be ordered through Information Systems & Technology (IST), if required. Please submit a request to rt-ist-NSsecurity@rt.uwaterloo.ca 








  • No labels