Filtration (Sieving)

Table of Contents

What is filtration?

Filtration is the chemical or physical process of separating a solid or liquid from another substance using a separation method that allows the desired material to pass through a medium and leave behind the remaining undesired material. Remaining materials that do not pass through the filters are called the filtrate. Filtration can be referred to physical, chemical, biological or mechanical filtration. Different pore sizes determine what material can be effectively filtered and what cannot, depending on the size of the molecules intended on being filtered. Filtration is dependent on pore size, filter thickness and biological activity. Sieving (also known as size separation) is the simplest and quickest form of filtration, however it lacks efficiency and optimal results. It uses a size separation method, where molecules are filtered through size. 


Types of filters

· Strainers – pump protection

· Tubing scale filters 

· Nutsche filters

· Bag filters

· Sintered filters

· Continuous vs non-continuous, monitoring methods for filter

Figure 1. Process of sieving through size distribution

Filtration in Design

Requirements for a filter involve 

  1. A filter medium
  2. a fluid is suspended solids
  3. a driving force (Ex. air pressure in sieving)
  4. mechanical device that holds the medium, fluid and provides. a driving force

There are many types of filter mediums and driving force options. 


Filter Media (classes)

There are different classes for filter media, which regards the thickness of the filter medium.  

  1. Thin Barriers

Thin barriers include cloth, filter screen or a common laboratory filter paper. These thinner filter mediums have smaller openings compared to the particles that are to be filtered out from the fluid. The solid particles left behind create a layer on the filter that accumulates and becames a "porous cake" that is permeable to the fluid. If the filter cake are made of soft or compressible particles, the pores may close and be unable to continue filtration. 

2. Thick Barriers

Thick barriers include a sand bed. These filter mediums make fluids to pass through a longer path of filtration, where undesired particles can be entrapped in the finer interstices between the particles that make up the filter bed. The soft particles removed are distributed throughout the filter bed, which prevents a filter cake that can be blocked like in thin barriers. After solids accumulate in the thick barrier, it can be cleaned with water. 

Filter Force

Filter force can be conducted through gravity, centrifugation, pressure above the fluid, a vacuum below the filter or a combination. In gravitational filter force, it can be used in large sand-bed filters or in laboratory filtrations. Filter force by centrifuges requires a bowl with a porous filter medium, where particles are centrifuges into the filter lined on the sides. Vacuums are applied below the filter medium to increase the rate of filtration and often used in labs or continuous filtrations in industries. 

What is molecular sieving?

A molecular sieve is a highly porous medium or crystalline matrix with consistent pore sizes that separate molecules based on its pore size and target characterization. Molecular sieving is highly selective with a high adsorption efficiency, which makes it useful in dehydration and desulfurization of gas. Molecules in liquid mixtures can be filtered through the matrix as components with the largest molecular weight pass through the pores first, leaving smaller molecules to enter the matrix and become successfully captured by the pores in the matrix. Molecules that are too large to fit through the pores exit the matrix. They can also sieve through ion-exchange  due to its highly localized polar charges on the surface. Molecular sieving can be used in particle/molecule characterization, also known as size-exclusion chromatography. Common mediums are  silica gels, activated charcoal and zeolites. 

Advantages and disadvantages

Sieving is the most commonly used filtration due its simplicity and cost efficiency. However its simplicity has drawbacks, such as ineffectiveness when there is clogging due to wet materials/powders or attrition during agitation. Residue may stick with remaining material, which makes it less optimal. 

Degrees of Sieving

The diameter of a molecular sieve is measured in ångströms (Å) or nanometres (nm). Materials with a pore diameter of less than 2 nm are considered microporous and materials with a pore diameter greater than 50 nm are considered macroporous. Materials with a pore diameter between 2 and 50nm are categorized as mesoporous. 

Powder GradeMesh aperture that powder passes through

Coarse

1.7mm

Moderately coarse

710µm
Moderately fine335µm
Fine180µm
Ultrafine125µm

Different Sieving Methods/Devices (mechanical)

Agitation

Using different motions/movements allows contents to pass through the sieve more easily.

a) Oscillation

The sieve is connected to a machine that moves the sieve back and forth, where contents are able to roll back and forth across the sieve

b) Vibration

The sieve is connected to a high speed device where the sieve rapidly shakes in small motions, allowing smaller contents (powder) to fully pass through.

c) Gyration

This method uses small and quick rotary movement to agitate particles through the sieve.

Brushing

Brushing is where a person manually uses a brush to brush contents to move the contents through the mesh, and is usually used for leftover contents after most has already been sieved. The brush is rotated from the middle of the sieve.

Centrifugal

This method uses a centrifuge (cylindrical) sieve where particles are separated through one dimensional high speed centrifugal force. The current of air made by the centrifugal movement throws the particles outward to the sieve walls.

Air jet

Air jet sieving requires a low pressure vacuum chamber where particles are pulled through the sieve. Powders can de-agglomerate with this method as well. 


Zeolites

Zeolites are crystalline alkali metal alumino-silicates in a three dimensional tetrahedral structure, which can be natural or artificially modified. They exhibit porous surfaces, high melting points, high pressure resistance, strong stability and do not dissolve in water or oxidize in water. Synthetic zeolite materials can be characterized in vitro, by changing pore size, affinity and crystalline structure. In artificial synthesis, slow crystallization of silica-alumina gel in presence of alkalis is conducted. Due to its ability to obtain different properties, they can also be made with other varieties of other atoms. Zeolite has a negative charged framework, which attracts positive cations and actively regulates cation exchanges. Its structure allows small molecules to pass through but trap larger ones.  

Types of Zeolites

  1. Low silica

Low silica zeolite frameworks are balanced by the maximum number of cation exchanges, meaning it has the highest cation content and exchange capacities. It exhibits a high heterogeneous surface due to the exposed cationic charges, which results in high field gradients. Low silica zeolites are commonly used in purification as it is particularly selective for water, polar and polarizable molecules.

2. Intermediate silica

Intermediate silica is an improved version of low silica zeolites, in regards to thermal, hydrothermal and acid stability, due to the higher content of silicon. It can be used as an adsorbent and hydrocarbon conversion catalyst.

3. High silica

High silica zeolites are more homogeneous with organophilic-hydrophobic selectivity and absorb less polar organic molecules. It contains a smaller amount of aluminium, allowing a higher concentration, and therefore give cation exchanges more ability to bind with OH- groups, as well as help with acid hydrocarbon catalysis properties. 

Figure 2. Natural Zeolite mineral

Application

  1. Petroleum industry

Molecular sieving is used in petroleum industries where specific undesired molecules such as carbon dioxide or sulfur compounds (liquid or gas) can be removed, leaving a purified or low contaminant gas stream.

2. Air filtration

Air in air supplies used in breathing apparatuses must be properly cleaned and purified, and can be put through a cartridge filter (such as activated carbon), where particulates or exhaust products are removed.

3. Medical 

Artificial synthesis using different varieties of atoms in zeolites can produce antibacterial, biocompatible and non-toxic characteristics, which are greatly used in wound healing and adsorbing blood. Zeolite in combination with drug-loaded polymers can conduct drug release or be used as biosensors to detect cancer biomarkers. 

Sieve Analysis

Sieve analysis is a procedure used to analyze particle size distribution of sieved materials. It can be done on any material, such as sands, crushed rocks, soil, coal, powders, and grains. Due to its simplicity, it is the most common technique. The sieve analysis is conducted with multiple sized sieves, starting with the largest hole size at the top and gradually smaller sizes than the previous sieve through the system. The column is put through a shaker to agitate contents and allow thorough distribution through meshes and avoid blockage. The contents are then characterized into a size range and properties can be properly described.Â