CAN Connector
CAN connector pinouts should match this image. The yellow line is the edge of the board and the connector is mounted on the front in this image.
M12 Connectors
Use | Connector Coding | Mating (From perspective of box-source and box-input) | Digikey Link | Locations |
|---|---|---|---|---|
Ethernet Connection | D | Box Source: Female Box Input: Female | ||
Standard Data Transfer | D | Box Source: Male Box Input: Male | DAQ data transfer | |
Standard DC Power | A | Box Source: Male Box Input: Female | Standard power connector | |
High Current DC Power | T | Box Source: Female Box Input: Female | DAQ Power |
Power Pinout
Pin numbering starts from the left of the notch on a female connector, and goes clockwise
Pin 1: GND
Pin 2: 5V
Pin 3: 12V
Pin 4: 24V
Ethernet Pinout
We use D-coded M12s with the following (common in industry) pinout:
