Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Table Hub

The following are located in the Table Hub.

  • Power button: to begin using this device you must press the power button on the remote to turn it on.

  • Mic Pod: this mic pod will help you connect to the Table Hu.

  • Future Expansion:  the future expansion is another input area in the table hub.

  • Connection to display Hub

  • HDMI 1 in 

  • HDMI 2 in 

  • Meeting Room Computer USB 

  • Future Expansion 

  • Security Slot 

  • Power LED 

Display Hub

  • Speaker: 

  • Power: 

  • Connection to the Table Hub 

  • HDMI 1 Out 

  • HDMI 2 Out 

  • Meeting Room Computer USB 

  • Camera 

  • Security Slot 

  • Remote Control pairing 

  • Power LED

Camera

The camera has the following details included inside it.

  • Remote control pairing button

  • USB 

  • Status LED 

  • Security slot 

  • MIPI 

  • Tripod Thread 

  • Expansion Slot 

Remote

The remote control has the following buttons.

  • Bluetooth pairing 

  • Call answer 

  • Call end 

  • Microphone mute 

  • Zoom in/out 

  • Volume up/down 

  • Home 

  • Camera pan/tilt 

  • Camera presets 

How to Start a Video Call

  1. After installing RALLY PLUS make sure it is the default device in your video conferencing application. 

  2. Begin by selecting Rally Plus to be the camera, speaker, and microphone in your video conference applications.  

  3. Helpful FAQ page from their website: https://prosupport.logi.com/hc/en-us/articles/360040084853

How To Pair Rally Plus to a Bluetooth Device

  1. Once it is paired to a Bluetooth device, you can use Rally Plus for audio calls.

  2. To begin: press and hold the Bluetooth button on the remote.

    1. When you see the flashing blue light on the camera and microphone you can let go of the button.

  3. Place your mobile device in Bluetooth pairing mode.

    1. Select “Logitech Rally“.

  4. Finished! You should now be connected.

How to Pair a Remote Control to Rally Plus

  1. Press down and hold the button on the camera until the LED flashes.

  2. Press and hold the button on the Display Hub until the LED flashes.

  3. Press and hold the Bluetooth button on the remote control until the LEDs on both the camera and Display Hub stop flashing.

  4. If the pairing fails, repeat from step one.

Using Rally Plus in Larger Rooms

  1. Some options or enhancing the use of this device is to use the following options:

    1. Rally Mounting Kit

    2. Extra Mic Pods

    3. Mic Pod hub

    4. TV Mount

  • No labels