...
Criteria
The CO2, moisture, and temperature sensors are able to interface with the soil correctly. The CO2 and temperature sensors are mounted within enclosures which ensures better sealing of the environment. Once the part is 3D printed further adjustments might be made for better sealing of these sections. The design allows the insertion of the moisture sensor to appropriate depth
The sensor head is relatively small and which helps to minimise the weight
Constraints
Sensor head does not interfere with any of the other componentsIt ; it is sufficiently small such that it does not interfere with the dinolite camera and allows it to freely move
All three sensors interface with the soil at a lower point than the bottom part section of the P0234
The sensorhead is attached at two points with several screws. Its weight is safely distributed among these two points.
...