Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Follow these instructions to automatically connect to eduroam using your username@uwaterloo.ca and password, instead of the default machine authentication credentials. (Your username is your 8-character UWaterloo username, e.g. myuserna.)

  1. In the Search field next to your Windows home button, type run and press Enter to open the Run app: 

    Image Modified

    (alternatively, you can press the Windows key and the letter R at the same time to open the Run app) 

  2. Type control into the Run app and press enter to open Control Panel 

    Image Modified

  3. Select View network status and tasks below the Network and Internet heading 

    Image Modified

  4. Click on Wi-Fi (eduroam) 

    Image Modified

  5. Click Wireless properties, and switch to the Security tab. 

...

  1. Image Added

...

  1. Image Added

  2. Select the Settings button beside Microsoft: Protected EAP (PEAP) 

    Image Modified

  3. Click Configure 

    Image Modified

  4. Ensure that the box beside ‘Automatically use my Windows logon name and password (and domain if any)’ is unchecked, then click OK 

    Image Modified

  5. Press OK again, then select Advanced 

    Image Modified

  6. Ensure Specify Authentication Mode is checked and User Authentication is selected, then click Save Credentials 

    Image Modified

  7. Enter your username@uwaterloo.ca and the corresponding password, then click OK 

    Image Modified

  8. Select OK on the two remaining settings windows, then click Close 

  9. Turn Wi-Fi off and back on again, then attempt to connect to eduroam. If you are prompted for credentials, log in with your username@uwaterloo.ca and corresponding password 

You should be connected to eduroam with your credentials. 

...

Tip

Article feedback

If you’d like to share any feedback about this article, please let us know.