...
power.SchDoc (<Rayyan Mahmood>)
...
Add a second LED for 1.8V out
...
Change the colour of this title to match the colour of “GND”, “3V3”, etc.
...
Add test points for 1.8V and 3.3V and a GND test point as well.
...
Look at the 48-17V buck schematic and see which TPs were used for the power and GND and use the exact same ones here
...
Annotate schematic → label components
Click annotate schematics quietly and that’ll do it
GPS_Module.SchDoc (<Rayyan Mahmood>)
- It is up to the designer’s discretion as to what should be reviewed for each schematic sheet
Put GND pins at the bottom like you did with the filtering caps
Is this going to be a firmware feature? As in will firmware be needed to “detect_antena”?
We can place TPs afterwards for this as we continue to work through it as we learn more about RF and antenas as required.
Still may potentially add external antenna
Generic Schematic Reviews
...