Page Comparison

...

1. On the Course Home, click Announcements in the widget title to access the Announcements tool.

2. Select the desired Announcement.

3. Under Additional Release Conditions, you will see a Create and Attach and an Attach Existing button. Attach Existing will only produce results if you have already created Release Conditions.

4. Click the Create and Attach button.

5. From the Condition Type drop-down menu, select the condition type relevant for the moduleannouncement. You must select an indented category option, not the category heading.

   

6. Select the Condition Detail that corresponds with the condition type you selected.

7. Click the Create button. 

8. If it is a new announcement, click Publish or, Save as Draft button. If you are editing an announcement, click the Update button.

...

1. Click Resources from the course navbar.

2. Select Checklists from the drop-down menu.

3. Select the desired Checklist.

4. Select the Restrictions tab. You will see a Create and Attach and an Attach Existing button. Attach Existing will only produce results if you have already created Release Conditions.

5. Click the Create and Attach button.

   

6. From the Condition Type drop-down menu, select the condition type relevant for the modulechecklist. You must select an indented category option, not the category heading.

   

7. Select the Condition Detail that corresponds with the condition type you selected.

8. Click the Create button. 

9. Click Save and Close or Save.

...

1. Click on Content from the course navbar.

2. Select the desired Module from the left-hand side panel.

3. Click the down arrow next to the desired item and select Edit properties-in-place.
   

   

4. Click Add dates and restrictions.

5. You should now see a Create and a Browse button under the release conditions section of the page. Browse will only produce results if you have already created Release Conditions.

6. To create a Release condition, click the Create button. This will open a new window.

7. From the Condition Type drop-down menu, select the condition type relevant for the moduletopic. You must select an indented category option, not the category heading.

   

8. Select the Condition Detail that corresponds with the condition type you selected.

9. Click the Create button.

10. Click the Update button to save the release condition.

...

1. Click Submit from the course navbar.

2. Select Discussions from the menu.

3. Click the down arrow next to the desired item and select Edit Topic.

4. Select the Restrictions tab. You will see a Create and Attach and an Attach Existing button. Attach Existing will only produce results if you have already created Release Conditions.

   Image Removed

5. Click the Create and Attach buttonExpand the Availability Dates & Conditions tab on the right hand side of the discussion topic.
   

   Image Added

6. Click on Add Release Condition

7. Click the Create New link.

8. From the Condition Type drop-down menu, select the condition type relevant for the modulediscussion. You must select an indented category option, not the category heading.

   

9. Select the Condition Detail that corresponds with the condition type you selected.

10. Click the Create button. 

11. Click the Save and Close, Save and New, or Save button button to save the release conditions added.

...