...
- Verify power rails are not shorted to GND or with each other
- Verify EN/RST/SHDN pins are not shorted to either GND or a power rail, unless it is supposed to be
- Verify communication protocol lines (i.e. SDA & SCL for I2C, MISO MOSI SCLK & CS for SPI, etc.) are not shorted with each other, with a power rail, or GND
Basic Powered Tests
General Tests:
- Program microcontroller
- Verify the TVS diode function protects against overvoltage on analog lines
- Do a full system test with all of the rails powered and make sure nothing explodes
...