...
S# | Bounds & Interfaces | Spec Document | Section Owner | |||
|---|---|---|---|---|---|---|
R0.0 | Rocket (Highest Level) | |||||
1.0 | Recovery System | All Parts from tip of nosecone to the Recovery bulkhead & Electronics sled. | ||||
1.1 | Nosecone | |||||
1.2 | Shear-pin coupler | |||||
1.3 | Parachute Tube | |||||
1.4 | Parachute & Rigging | |||||
1.5 | BigRedBee System | Matti Gencher | ||||
1.6 | Deployment Pyrotechnics | |||||
1.7 | Recovery Electronics Sled | Stefan Arroyo-Cottier | ||||
1.78 | Flight Computer Electronics System | |||||
1.89 | Live-Telemetry System | 1.9 | CAN-Power Management System | |||
2.0 | Cubesat Payload | |||||
2.1 | Payload Structure | |||||
2.2 | Payload Experiment | |||||
3.0 | Upper Airframe | |||||
3.1 | Upper Bodytube | |||||
3.2 | Payload Retention Structure | |||||
3.3 | Camera System | |||||
4.0 | Tank Vent System | |||||
4.1 | Pressure Relief Systems | |||||
4.2 | Vent Valve & Actuator | |||||
4.3 | Vent Pneumatics | |||||
4.4 | Vent Electronics | |||||
5.0 | Oxidizer Tank | |||||
5.1 | Raceway | |||||
5.2 | Ox Tank | |||||
6.0 | Ox-Tank-Aft-Skirt (OTAS) | |||||
6.1 | Longerons | |||||
6.2 | Fairings | |||||
6.3 | Fill Disconnect Hatch | |||||
7.0 | Injector Feed System | |||||
7.1 | Injector Valve | |||||
7.2 | Injector Electronics | |||||
7.3 | Ox Fill Disconnect line | |||||
8.0 | Combustion Chamber | |||||
8.1 | Injector bulkhead Assembly | |||||
8.2 | Fuel & Chamber Assembly | |||||
8.3 | Nozzle Assembly | |||||
9.0 | Fins & CC Airframe | |||||
9.1 | Fin body | |||||
9.2 | Boat-Tail | |||||
9.3 | Nozzle Interface | |||||
10.0 | Electrical Harness | |||||
10.1 | Recovery Harness | |||||
10.2 | Upper Section Harness | |||||
10.3 | OTAS Harness | |||||
G0.0 | Launch GSE (Highest Level) |
...