Page Comparison

Table of Contents

What is a Power Supply?

A power supply is device that converts power supplied from a source to the correct format and voltage. Power can have different characteristics and the formats and voltages may vary depending on the application. The power supply may need to increase or decrease voltage, convert the power to direct current, or regulate the power for a smoother output voltage [1].

How it Works

Since the source of power outputs a consistent amount of power regardless of the device connected to it, the power supply must step down the voltage to prevent overload or step up the voltage to meet the requirements of the device [1].

Aside from regulating the voltage, the power supply must convert the incoming electricity into the correct format for the device.  There are two types of power supplies, DC and AC. DC power supplies supply direct current whereas AC power supplies an alternating current. Most electrical devices utilize direct current, and so a power supply can convert the AC power into DC power [1].

Bench Power Supplies

A bench power supply (also known as a variable power supply) is a necessary tool to have in order to test components. These power supplies provide an adjustable DC voltage supply, but some models can provide constant current. Bench power supplies generally have similar appearances and control methods. These power supplies will have a grounded metal case and a spot to plug in an AC power cord. On the front, there will be two displays: one for voltage and one for current. To set the voltage and current, there will be either knobs or buttons. Additionally, there will be buttons to turn the output on and off [2].

How to Use It

When a power supply is in constant voltage, the output voltage matches the voltage that was set by the user, and the current is determined based on the load. When a power supply is in constant current, the output current matches the current limit set by the user, and the voltage is determined by the load. The user must set either the outgoing voltage or the current limit using the knobs or buttons on the power supply. The circuit and components can then be connected to the power supply using wires.

Ensure that the power supply is connected to a power source. A power cord connecting the power supply to the power source (such as a wall outlet) should be in good condition. Furthermore, the power supply will be turned on via a switch or button [4].

References