Table of Contents
Introduction
Long span structures are buildings that create unobstructed column-free spaces greater than 30 metres. This design lends itself to be useful for activities where visibility is important for large audiences (auditoriums and covered stadiums), flexibility is important (exhibition halls and manufacturing facilities), and for housing large movable objects (aircraft hangars) [1]. Prominent real life examples of long span structures include Scotiabank Arena in downtown Toronto and the Sydney Opera House.
Scotiabank Arena [2] | Sydney Opera House [3] |
Trusses
A truss is a triangular system of straight interconnected members. Each member of a truss is connected via joints, which we consider pinned connections during calculations to simplify analysis as truss joints are fixed in real life. Trusses are unique, as each individual member in a truss is a two-force body. Additionally, the reaction forces on a truss only occur at the joints. A diagram of a truss and its properties can be seen below.
Diagram of a simple truss; Member 1 is in compression, Member 2 is in tension [4] |
Trusses are used in a wide array of buildings to provide horizontal stability and carry the roof load of a building. Trusses are also especially useful when there is a need for very long spans, such as in airport terminals, aircraft hangers, stadium roofs, and bridges [4].
The Eiffel Tower, which contains regular intervals of trusses along its height [5] | Burlington Skyway [6] |
Folded Plate Structures
The folding plate method of construction is a system that utilizes flat slabs or plates that are inclined in different directions and are joined along their edges at the top. This technique is normally used for roofs, as folded plate roofs use less material and provide greater weight bearing capacity than a large roof slab would. Folded plate roofs also take less time to install, which further reduces cost even more [7].
Folded Plate Hut in Osaka, Japan [8] | Wexler Folded Plate Steel Roof [9] |
Shell Structures
A shell structure is a curved continuous surface where the thickness is much smaller than the other dimensions. The advantage of shell structures is that they excel in resisting large compression loads evenly distributed over their surface, allowing the span of large spaces without the need for intermediate columns. However, due to shell thickness being very small these structures have little tensile strength and are susceptible to failure under concentrated loads. Shell structures are also less economically viable due to high construction labor costs, concrete costs, and high maintenance costs stemming from the structures small thickness [10].
TWA Flight Center Building, JFK International Airport [11] | Eden Project, UK [12] |
Frame Structures
A frame structure is essentially the "skeleton" of a building, as seen in the image below. Frame structures are composed of horizontal beams, vertical columns, and slabs [13].
Steel frame structure [14] |
Frame structures can be classified as either a rigid frame structure or a braced frame structure.
Tent Structures
Contributors:
User | Last Update |
---|---|
Former user (Deleted) | 1270 days ago |
Former user (Deleted) | 1271 days ago |
Former user (Deleted) | 1298 days ago |