Level Switches

What are Level Switches?

A level switch is a way to detect the level of a liquid, powder or granulated materials in a container. There are few different types of level switches but they all serve the same purpose. When the conducting liquid reaches a certain height in the tank, a circuit is changed or completed and will output a signal or alert to the liquid level. You can have a high-level or low-level switch [1].Level switches are used in a large variety of applications such as oil tanks, washing machines, and wells [2].

Types of Level Switches

There are three main types of float switches you can use, depending on the application. There are other types of level switches but these 3 are most common

• One type of level switches is a float switch. The switch floats on top of the liquid and responds to the level moving up or down with an internal sensor in the switch. This sensor can complete a circuit to form an alert for the surface level of the tank.
• The second type of level switches is a capacitance switch. This works by having a probe hanging from a certain height into the tank, forming a two plate capacitor with the wall of the tank and the probe. When the level reaches the probe, a the capacitance changes between the probe and the wall due to the differing dielectric constant for the liquid compared to air. This triggers a change in the circuit for an alert to the changing level of liquid.

• The last type of level switch is a vibrating switch. This works by utilizing 2 hanging vibrating prongs, and when the liquid reaches the prongs, their frequency changes. A device picks up this change and sends an alert [3].

  Figure 1: A basic float switch [4]	Figure 2: A capacitance level transmitter [5]	Figure 3: A couple of different sizes of vibrating fork level sensors [6]

Design Specifications for Level Switches

Switch Type

• Electromechanical Switch-These switches have mechanical contacts and can handle a much wider range of voltage and current. These are not affected by dirt or magnetic fields and can withstand up to 1000°C. These switches cost more, and do not last as long.
• Solid-State Switch-These switches do not having moving parts in the assembly. These are able to respond much faster than an electromechanical switch.

Electrical Configuration

• Normally Open (NO)-These circuits become closed when a "contact" is made (when the level reaches the specified height).
• Normally Closed (NC)-These circuits are closed and current runs, until the correct level is reached in the tank.

Pole/Throw

• Single Pole, Single Throw (SPST)-This circuit has a single conductor which is made or broken in a single branch circuit. They usually have 2 terminals.
• Single Pole, Double Throw (SPST)-This circuit has a single conductor which is made or broken with 1 or 2 single conductors. They usually have 3 terminals.
• Double Pole, Single Throw (SPST)-This circuit has 2 conductors which are made or broken in a single branch circuit. They usually have 6 terminals.
• Double Pole, Double Throw (SPST)-This circuit has 2 conductors whose connections are made or broken to 2 separate circuits. They usually have 6 terminals.

Communication Interface

• Serial-This means the data bits are sent serially (one after the other) over a single line. The advantages are the data can be sent farther and it is easier to set up.
• Parallel-In this configuration, the data bits are all sent at the same time. More information can be sent quickly and reliably, but processing time is longer. 

Measuring Range

This is the range of the level switch. The measuring range of the switch is determined by the maximum and minimum media levels in the tank or container. The overrange factor limits what the switch views as a match, so that when the level is way outside the range, it does not respond.

Mounting Styles

The switch can be top, side or bottom mounted. Depending on the application, and the characteristics of the level switch, this is a very important consideration.

Other Features

• Rated for Sanitary Applications
• Built in Alarm (which is more than a switch)
• Programmable
• Controller Functions [7]

Applications for Level Switches

Float Level Switches

Float switches are very commonly used for pump and valve controls. These switches can be used to open or close a pump, depending on the level in the tank. You can fill or drain the tank very easily with this setup. Another application is high and low level alarms. The float switch will detect the level in the tank or container and trigger an alarm or alarm message. This can prevent overfills for dangerous substances like oil. Float switches can also be used for immersion heater protection. It is important that the liquid in the heater stays above the heating element. If the level drops to the element, the switch can cut supply to the heater [8].

Capacitance Level Switches

Capacitance level switches are traditionally used in non-metallic applications. Common industries where capacitance level switches are used are: plastics, chemical, wood, ceramic and glass, and packing industries.

Vibrating Level Switches

Vibrating rod level switches are commonly used with powders and bulk solids. They are great for applications with silos and hoppers. Some materials it can used for include: cereals, sugar, animal feed, flour, and wood chips [9].