Reactors

Table of Contents

What are Reactors?

Chemical reactors are enclosed areas in which chemical reactions take place [1]. These vessels can vary in size immensely, from smaller reactors in lab settings, to larger industrial vessels. Chemical reactors can take many forms, but the most basic types of chemical reactors are tanks and pipes or tubes. 

Examples of Reactors

The most common vessels in which reactors are placed in are tanks, however some reactors such as heat exchangers and water softener's can tend to take place in pipes or tubes. The high velocities of products in a pipe offers many advantages for these specific use cases [2]. Tanks as a vessel is a very broad term, which can range from a test tube to fermentation barrels. In general, a tank is a 

Design Considerations

When designing a reactor, several design aspects can dictate the properties of the reactor. Some aspects to consider are the addition of Valves for flow control and pressure relief, and the addition of a cooling system. Additional sensors for pressure, pH, temperature, etc... may be required for added control. Another factor to consider is the material of the tank itself, and if it is safe to use with the specific reactants and products [1].

Types of Reactors

Chemical reactors can be classified into several different types of reactors, all of which serve to aid in different conditions and process requirements.

Batch Reactors

Batch reactors are the simplest form of chemical reactor. Reactants are loaded all at once into the reactor, and the reaction takes place over time. At the end of the reaction, all of the products leave the reactor at once. A good visualization of this process is baking cookies [1].

Continuous Reactors

Continuous reactors come in many forms, but generally a continuous reactor is a reactor which continuously takes inputs and releases outputs. A good visualization of this is an assembly line [2].

Continuously Stirred-Tank Reactors (CSTR)

Continuously stirred-tank reactors are a type of reactor which reactants are introduced into a reactor equipped with an impeller (or stirrer). The products are reactants are continuously removed and added, at a equivalent rate [2]. 

Tubular Reactors

Tubular reactors are a type of reactor which is usually done in connection to a pipe. Reactants flow through the reactor at high velocities and exit as products. A common tubular reactor is a heating pipe [2].

Semi-batch Reactors

Semi-batch reactors are a type of reactor which are very similar to batch reactors, with the added ability to remove products and add reactants in time [3]. These have many advantages over traditional batch reactors, such as better heat control and in order to aid the amount of reaction reversibility. 

Biological Reactors

Biological Reactors are a type of reactor which utilizes a biological transformation or process to perform the reaction [5]. Examples of this are Fermenters, which uses yeast (a single cell fungi) to convert sugar into ethanol. 

Fluidized Bed Reactors

Fluidized Bed Reactors are a type of reactor which involve using fine particles which sit on a distributer plate. This style of reactor is usually intended for gaseous reactants. Theses reactants pass through the particles and exit through the top of the reactor [2]. There are two main types of fluidized bed reactors, inert and catalytic. The type refers to the fine particles, which can either be inert or catalytic.