Plug in your headsets into a USB port (Both USB 2.0 and USB 3.0 are supported).
For Laptop users: You can usually find the USB ports on both sides of your laptop
For Desktop users: You can usually find the USB ports on the front panel or the back panel of your PC case. Sometimes USB ports are located on the side of the PC case
To activate the Dell headphones on your Mac, go to System Preferences.
2. Then click Sound.
3. In sound effects there is an option that says, “Play sound effects through”.
4. Click on the drop-down button and select DELL PRO STREO HEADSET UC15.
5. Click on the Output tab at the top of the sound screen.
6. There is an option to select a device for sound output. Select DELL PRO STREO HEADSET UC15.
7. Click the Input tab at the top of the sound screen.
8. There is an option to select a device for sound input. Select DELL PRO STREO HEADSET UC15.
9. Your headset is now connected to your Mac.
Open MS Teams and sign in.
2. Click on your profile picture which is in the top right corner of the MS Teams page and then click settings.
3. Under setting click “Devices” and set your audio devices to DELL PRO STREO HEADSET UC15.
4. After setting your audio devices to DELL PRO STREO HEADSET UC15, you can make a test call by clicking the “make a test call” option underneath the microphone selection to ensure your headset and microphone are working properly.
Sign in with your WatIAM credentials.
When the headset is plugged into your Mac and is connected to DELL PRO STREO HEADSET UC15 in system preferences, it should automatically connect to skype for business.
Sign in with your WatIAM credentials.
When the headset is plugged into your Mac and is connected to DELL PRO STREO HEADSET UC15 in system preferences, it should automatically connect to Cisco WebEx Meetings.
Plug in your headsets into a USB port (Both USB 2.0 and USB 3.0 are supported).
For Laptop users: You can usually find the USB ports on both sides of your laptop.
For Desktop users: You can usually find the USB ports on the front panel or the back panel of your PC case. Sometimes USB ports are located on the side of the PC case.
The driver for this headset will be automatically installed on your PC silently. (You might get a prompt on the right corner of your PC’s screen says “Setting up New Devices”)
The whole process of setting up the driver will roughly take 1 minute depending on the specification of the PC, so please be patient.
Right click the Volume Adjustment icon on the right side of the Task Bar 
Select “Open Sound Settings”.
3. A new window will pop up and you should see your system voice input device and sound output device.
4. Under “Choose your output Device”, choose “Headset Earphone (DELL PRO STEREO HEADSET UC150)” as the input device.
5. Under “Choose your input device”, choose “Headset Microphone (DELL PRO STEREO HEADSET UC150)” as the output device.
6. Now the system voice input and sound output device have been set to this headset.
Even if the system voice input and sound output device have been set to this headset, sometimes MS Teams will not change its input and output devices along with the system.
Open MS Teams.
Sign in with your MS account or your Organization account (In this case, you should use the credential ended with uwaterloo.ca).
After successfully signing into MS Teams, click on your profile picture which is located on the top right of the MS Teams window.
Select “Settings”.
5. A new window will pop up and on the left option bar, choose “Devices”.
6. Under “Speaker”, choose Headset Earphone (DELL PRO STEREO HEADSET UC150) to set as the output device for MS Teams.
7. Under “Microphone”, choose Headset Microphone (DELL PRO STEREO HEADSET UC150) to set as the input device for MS Teams.
8. The headset is now successfully set up for MS Teams and ready to be used.
It is strongly recommended to test your Speaker and Microphone after you finished the steps above:
You can test them by making a test call on MS Teams. (It is available on the same window where you choose your input and output device in MS Teams)
Follow the instructions in the test call. If you can hear yourself, then the devices have been set up successfully.
It is strongly recommended to test your Speaker and Microphone after you finished the steps above:
You can test them by making a test call on MS Teams. (It is available on the same window where you choose your input and output device in MS Teams)
Follow the instructions in the test call. If you can hear yourself, then the devices have been set up successfully.
In most cases, Skype will not set this headset to be the default input and output device, you will need to set it manually.
Open Skype for Business.
Sign in with your Skype account.
After signing in, click on your profile picture which is located on the top left of the Skype window.
4. A window will show up, on the left option bar, choose “Audio Device”
On the right side:
Choose “Headset Earphone (DELL PRO STEREO HEADSET UC150)” for Speaker.
Choose “Headset Microphone (DELL PRO STEREO HEADSET UC150)” for Microphone.
It is recommended that you test the speakers and microphone before use:
To test the speakers, click:
To test the microphone, click “Check Call Quality” and follow the instruction in the call.
5. The headset is now successfully set up for Skype for Business and is ready to be used.
If you have set this headset as the system input and output devices, CWM will follow the system input and outputs device automatically in most cases. You can always change the input and output devices for CWM when you are starting or joining a meeting.
Open CWM.
Sign in with your CWM account. (For most faculty staffs and students, use the WatIAM credential)
When it asks “Which WebEx you want to see?”, enter “uwaterloo.webex.com”.
A new window will pop up and ask you to use your WatIAM credentials to sign in.
After signing in, when you are starting or joining a meeting, click on the small arrow besides “Mute” button.
Choose Headset Earphone (DELL PRO STEREO HEADSET UC150) for Speaker.
Choose Headset Microphone (DELL PRO STEREO HEADSET UC150) for Microphone.
6. Test the speaker and microphone before use:
Click “Test Speaker and Microphone”.
Click “Test” for both Speaker and Microphone.
If you hear a short alert sound for speaker test, the speaker has been set up successfully.
If you can hear your voice record after the microphone test, the microphone has been set up successfully. (After you click on “Test” for microphone, you should start talking, the recording will end automatically, and you will hear your voice record after.)
7. The headset has been successfully set up for CWM and is ready to be used.
If you are using other headphones on your PC (such as a wireless headphone) already and plug in this Dell UC150 headset, the sound will not be outputted from this headset, you will need to manually choose this headset as the output device.
For this headset, the sound will be different if its microphone is currently in-use than when the microphone is not in-use.
If you are currently using this headset for music/video, unplugging this headset will NOT pause the music/video in most cases.
The “Phone” button that comes with this headset does NOT work unless you are using the softphone provided by Jabra Direct.
Open File Explorer 
Right click “This PC” 
Select “Manage” 
A new window will pop up, and on the option bar on the left, select “Device Manager”, this will give you the list for all the devices/drivers that are installed on your PC. 
5. On the list, find “Audio Inputs and Outputs”. 
If you can see:
Headset Earphone (DELL PRO STEREO HEADSET UC150) and;
Headset Microphone (DELL PRO STEREO HEADSET UC150)
All the drivers for the headset have been successfully installed.
If those two devices do not show up, there was a problem while automatically installing the drivers. You will need to install the driver manually. How to install the driver manually can be found HERE.
If those two devices do not show up, there was a problem while automatically installing the drivers. You will need to install the driver manually. How to install the driver manually can be found HERE.
For common issues and solutions, please read the following pdf:
(Reference: Dell Pro Stereo Headset UC150 User’s Guide)
Related articles appear here based on the labels you select. Click to edit the macro and add or change labels.