Connecting to Eduroam - General Overview

 

A University of Waterloo username is required to authenticate to the wireless network. Students, staff, and faculty with a UWaterloo username will have access to the Eduroam network.

On this page


Eduroam Connection Guides

If your device is not listed above, please try configuring your device with the following settings: 

  • Network SSID: eduroam

  • Network authentication method: WPA2 Enterprise

  • Data encryption method: AES

  • Authentication method: Protected EAP (PEAP)

  • Inner authentication (or Phase 2 Authentication): MSCHAPv2

  • CA Certificate: GlobalSignRootCA - R3

  • Outer identity: anonymous@uwaterloo.ca

  • Username: username@uwaterloo.ca (this is your 8-character UWaterloo username, e.g. myuserna)

  • Password: Your password

Connect using the eduroam Configuration Assistant Tool

The eduroam Configuration Assistant Tool can be used to configure eduroam on most computers (e.g. Windows, MacOS, Linux). 

  1. Download the eduroam configuration assistant tool from: http://cat.eduroam.org/. Click the button at the bottom of the page. 




  2. In the pop-up window, select University of Waterloo as your organization




  3. You will be redirected to the page shown below. Click the Download your eduroam installer button to download the tool.

     

  4. You will be prompted to enter your profile, which can be accessed through your System Preferences

  5. In the Enter your username…” pop-up window, click Continue.

  6. Click install.

  7. Follow the installation prompts and enter your 8-character UWaterloo username @uwaterloo.ca (e.g. myuserna@uwaterloo.ca) and password. Once you have entered your credentials, you should be able to connect to eduroam. 

Eduroam Troubleshooting Guides

Additional Resources

Need help?

Contact the IST Service Desk online or 519-888-4567 ext. 44357.