Cycle 2 Baseline (clipped delta with cycle 2 masses etc)
This is the cycle 2 masses and lengthes and such with the fins from last year as a starting place
Cycle 2 sim 1 (first stab at fin size for 2.5 calibers)
This is a rough simulation Joel did to get a sense for what the flight paramters looked like before he messed with stuff a lot
Ended up just shortening the fins a hair to 6in.
Wind Design Condition Studies
This is to help us decide what wind speed we want to design to
Cycle 2 Wind Sim 8mph
Designed fins to have min stability of 2.5 calibers at 8mph launch condition
Same as Cycle 2 sim 1 (first stab at fin size for 2.5 calibers)
Cycle 2 Wind Sim 10mph
Designed fins to have min stability of 2.5 calibers at 10mph launch condition
Cycle 2 Wind Sim 12.5mph
Designed fins to have min stability of 2.5 calibers at 12.5mph launch condition
Cycle 2 Wind Sim 15mph
Designed fins to have min stability of 2.5 calibers at 15mph launch condition
Max and Min Mass Condition:
After fin size is mainly set this is to confirm that in the max or min mass case from the spreadsheet results in a flyable stable rocket
Cycle 2 Sim Max Mass
Cycle 2 Sim Min Mass
Sensitivity studies on:
Other OR sim inputs
Launch rail being shorter if want
Surface roughness improvement
Ran study on file with cycle 2 masses not quite fully done and apogee went from 29413ft to 31347ft changing from regular paint (2.36mil) to smooth paint (0.787mil). No noticeable impact on stability