The instructions below work with all Linux-Ubuntu devices.
| Info |
|---|
The instructions below work with Ubuntu 20.04. These instructions may also work for non-Ubuntu distributions if your distribution uses the NetworkManager applet. If your distribution does not use the NetworkManager applet or if it uses wicd, you may need to install and configure wpa_suppliant manually. |
From your computer’s home screen, click on the battery icon under the System menu in the top right corner of the screen. In the drop-down menu, click on Select Network.
Select eduroam network and Click Connect
Enter the following details in the screen that is presented.
Authentication: Protected EAP(PEAP)
Anonymous Identity: [Leave Blank]
Domain: eduroam.uwaterloo.ca
CA Certificate & CA certificate password: leave as is and check the box next to “No CA certificate is required”
Inner Authentication: MSCHAPv2
Username: username@uwaterloo.ca (your 8-character UWaterloo, i.e. youruserna@uwaterloo.ca)
Password: your password
Click Connect
A window will pop up asking for your password again. Type in your password again and you should then be connected to eduroam.
...
Ensure all connection settings match the instructions above, especially:
Authentication: Protected EAP (PEAP)
Inner Authentication: MSCHAPv2
Domain: http: // eduroam.uwaterloo.ca
Username and password are entered correctly.
...