Use this guide for instructions This article describes how to connect your computer to your network drive over Wi-Fi.

...

...

Connected to VPN

...

If you accessing a network drive, make sure your drive is mapped (instructions below)

Connect to Wi-Fi (eduroam)

1. Locate the network icon in the taskbar and go to the list of wireless networks and select eduroam and click connect.

2. In the username field enter your 8-character username followed by @uwaterloo.ca  (e.g. j25rober@uwaterloo.ca)
   In the Password field enter your password, then click OK.

Connect to VPN

If VPN client has not been already installed, download and install Any Connect VPN client first.

...

Find the Any Connect VPN icon in the Taskbar Notification area (lower right corner).

...

Click to Connect to VPN (cn-vpn.uwaterloo.ca)

...

In this article:

Map a network drive (Windows)

1. Open File Explorer (you can search for “File Explorer” in the Start Menu)

2. Click This PC & at the top task bartaskbar, select Map network drive
    

3. In the Map Network Drive screen that is presented enter the following:

a. Drive dropdown menu

...

: select a letter (R:, etc.) you wish to associate with the mapped drive.

b. Folder: field: Enter the path to the server: \\

...

filed\dept$ where dept$ is the name of your Department's R drive.

c. Check the box next to Reconnect at sign-in

...

d. Click Finish

...

4. In the Windows Security pop-up window, type your credentials as nexus\

...

username in the username field and your password in the password field. (Username is your 8 character username, e.g. j25rober)

...

...

5. Click OK

6. Your

...

new mapped drive will be shown on the left-hand side of File Explorer and also under Network locations

Map a network drive (MacOS)

This example shows how to map to the R: drive

1. Switch to the “Finder” application (click on any empty place on your Mac desktop.)

2. Click “Go” Go on the Finder menu, then click “Connect Connect to Server…” Server… from the drop-down list, or use the keyboard shortcut “commandcommand+K”K.Enter the following

   Image Added

3. In the Connect to Servicer screen enter the following:

   1. Server Address input field: (for the IST R

   -drive in the “Server Address

   1. :

   ” input field:N

   1. drive): smb://

   fileu.uwaterloo.ca/users$/usernameR drive: smb://

   1. filed.uwaterloo.ca/ist$

   2. Click on the

   “Connect”

   1. Connect button in the lower-right corner of the window.
      

      Image Added

4. You will be prompted for your credentials: . Enter your 8-character username (e.g. j25rober) and your password.

Related articles

...

...

...