...
CAN connector pinouts should match this image. The yellow line is the edge of the board and the connector is mounted on the front in this image.
...
M12
...
Using information from Ultra Librarian on common uses for m12 keying
...
Connectors
Use | Connector Coding | Mating (From perspective of box-source and box-input)Use | Digikey Link | Locations | |
|---|---|---|---|---|---|
Ethernet Connection | D | Box Source: Female Box Input: Female | Ethernet ConnectionA126845-ND | ||
Standard Data Transfer | D | Box Source: Male Box Input: MaleStandard Data Transfer | DAQ data transfer | ||
Standard DC Power | A | Box Source: Female Wire Source: Male Box InputSink: Male Wire Sink: Female | Low DC Power | A134451-ND or A133878A126842-ND | Standard power connector |
High Current DC Power | T | Box Source: Female Box Input: Female | High DC Power | RLCS, Laptop, Antenna |
...
DAQ Power |
Power Pinout
...
Pin numbering starts from the left of the notch on a female connector, and goes clockwise
...
Pin 2: 5V
Pin 3: 12V
Pin 4: 24V
...
Ethernet
...
Pinout
We use D-coded M12s with the following (common in industry) pinout:
...
The ports on our boxes should have female contacts, and the wires linking the boxes together should be be male-to-male.