Page Comparison

...

Open ScandAll PRO to add batch scanning profiles.
Scan > Batch Scan Settings… > Add… 
In Job Profile Name, enter Multi Page Double Sided.
1. Change file format to Multipage Tagged Image File Format (*.tif).
  Image RemovedImage Added
2. Change scan type to ADF (Duplex).
  Image RemovedImage Added
3. Ensure Separate per is unchecked.
  Image RemovedImage Added
4. Navigate to File format and Name scheme, and click on Name Rule…
  Image RemovedImage Added
  1. Beneath Settings available click Date and Time then click >>(l) to move it to Settings applied; click Up to move the Date and Time to the first position.
  2. Beneath Page Counter: Start with 1, check off Reset to initial value after each scan(X).
  3. Beneath Date and Time: Format=yyyymmdd, check off Add time, Date/time separator= ”-“ (Hyphen).
  4. Change Character string1: “_” (underscore).
5. The Name Rule settings should then look like this:
  Image RemovedImage Added
In Job Profile Name, enter Multi Page Single Sided.
1. Change file format to Multipage Tagged Image File Format (*.tif).
  Image RemovedImage Added
2. Change scan type to ADF (front side).
  Image RemovedImage Added
3. Ensure Separate per is unchecked.
  Image RemovedImage Added
4. Follow the Name Rule instructions listed below Step 3.
In Job Profile Name, enter Singles
1. Change file format to Tagged Image File Format (*.tif)
  Image RemovedImage Added
2. Change scan type to ADF (front side)
  Image RemovedImage Added
3. Ensure Separate per is unchecked
  Image RemovedImage Added
4. Follow the Name Rule instructions listed below step 3
In Job Profile Name, enter Double Sided Single Document
1. Change file format to Multipage Tagged Image File Format (*.tif)
  Image RemovedImage Added
2. Change scan type to ADF (Duplex)
  Image RemovedImage Added
3. Ensure Separate per is checked and enter the number 2
  Image RemovedImage Added
4. Follow the Name Rule instructions listed below Step 3.

Versions Compared

Old Version 5

New Version Current

Key