...
CAN connector pinouts should match this image. The yellow line is the edge of the board and the connector is mounted on the front in this image.
...
M12
...
Using information from Ultra Librarian on common uses for m12 keying
...
Connectors
Use | Connector Coding | Mating (From perspective of box-source and box-input) | Use | Digikey Link | Locations |
|---|---|---|---|---|---|
Ethernet Connection | D | Box Source: Female Box Input: Female | Ethernet Connection | Whatever is currently used in bayA126845-ND | |
Standard Data Transfer | D | Box Source: Male Box Input: Male | Standard Data Transfer | A134516A129278-ND 708A126841-2297-ND | DAQ data transfer |
Standard DC Power | A | Box Source: FemaleBox Input Wire Source: Male Box Sink: Male Wire Sink: Female | Low DC Power | A134451A126842-ND A134487-ND or A133878 A134487A134451-ND Cables are what bay has | Standard power connector |
High Current DC Power | T | Box Source: Female Box Input: FemaleHigh DC Power | RLCS, Laptop, Antenna |
...
DAQ Power |
Power Pinout
...
Pin numbering starts from the left of the notch on a female connector, and goes clockwise
...
Pin 2: 5V
Pin 3: 12V
Pin 4: 24V
...
Ethernet
...
Pinout
We use D-coded M12s with the following (common in industry) pinout:
...
The ports on our boxes should have female contacts, and the wires linking the boxes together should be be male-to-male.