...
BMH-1048 has a TV with an HDMI connection. two HDMI connections (one hooked up to a computer in the room and the other that can be connected to a laptop computer). There is a wireless keyboard for the computer located in the room. There is also a video conferencing bar.
There is a power cord located under the table to provide power for laptops and peripheral devices that require power (e.g. video conference cameras, speakers)
...
Using the computer in the room
Power on the TV using the remote
Power on the keyboard using the switch on edge of the keyboard
Press the spacebar to wake up the computer
Wait for the HDMI1 input to be detected by the TV or press the Input button at the top right of the remote until HDMI1 is selected as the source on the screen.
Using the wireless keyboard, log on to the computer using your UW UserID and Password
Use the keyboard and trackpad to launch programs. Use the front USB ports on the computer for memory sticks.
When done:
Sign out of the computer
Power off the keyboard using the switch on the edge of the keyboard
Power off the TV using the remote
Using your own computer
Get your computer ready to present - powered up, logged in and ready to go.
Connect the cable from the TV to your computer (HDMI). If you don’t have an HDMI display port (or adapter) see the Reception area in Dean’s Office (BMH-3104) or Health Computing (BMH first floor hallway to SunLife auditorium).
Power on the TV using the remote (see note below if the remote is not available)
Wait for the HDMI1 input to be detected by the TV
Using a Mac? We recommend setting your display preference to “Scaled” at 1080P
When
...
done:
Disconnect your computer (see note below if the remote is not available)
Power off the TV with the remote (see note below if the remote is not available)
Neatly wrap up the cord on top of the table
If the TV remote is not available/working
Powering on the TV if the remote is not available:
Use the power button on the remote to power on the TV. If the remote is not available, power on the TV by pressing the button on the back of the TV. The power button is located on the back of the TV on the right side about 8” (20cm) above the bottom of the screen.
...
Powering off if the remote is not available:
...
Don’t disconnect your computer
...
Press the power button on the back of the TV (lower right corner)
...
Select the Power Off option by pushing the button down (towards the bottom of the screen
...
Press the power button again to power off
...
Using Video Conferencing
The room is has an all-in-one videobar (built-in video cameras, microphones and speakers) that can be used with computer-based video conferencing on platforms such as Teams, Webex, Zoom. Instructions for setting up and using the videobar are on the Classroom Video Conferencing in Health page.