...
Enter your WatIAM userid and your WatIAM password again as above, but this time enter your new code received from authentication in the “Second Password” field.
Once you get in, click the blue "Download" button.
Save the file it offers to download. Once it is fully downloaded, double-click it to install the client on your computer.
Once installed, you will have to start the VPN client by searching "Cisco" on your machine and running the "Cisco AnyConnect Secure Mobility Client" program. The program is in Finder > Applications > Cisco on the Mac.
This is also a good time to pin the client to your taskbar or dock to make it easier to find in the future.
Enter the VPN address address in the address field:
If you are off-campus and/or using WiFi, use cn-vpn.uwaterloo.ca
If you are on-campus and using ethernet, use vpn-inside.private.uwaterloo.ca
Choose the server address 'UW-General-Campus' from the dropdown and enter your WatIAM credentials when prompted.
In the future, when you reboot, the client will remember the VPN address and your WatIAM userid, but it will forget your password.
Enter your 2FA method in the "Second password" field, using the instructions in #3 above.
When the client is connected, a small lock symbol appears in front of the Cisco icon (the icon looks like a baseball with stylized blue stitching) in the System Tray in Windows or in the Dock on Mac.
You can now remote into your work computer (if properly set up), access your R: drive and other restricted resources and software on campus.
...