Page Comparison

...

1. Open ScandAll PRO to add batch scanning profiles 

2. Scan > Batch Scan Settings… > Add…  

3. In Job Profile Name, enter Multi Page Double Sided

   1. Change file format to Multipage Tagged Image File Format (*.tif)

      

   2. Change scan type to ADF (Duplex)

      

   3. Ensure Separate per is unchecked

      

   4. Navigate to File format and Name scheme, and click on Name Rule…

      

      1. Beneath Settings available click Date and Time then click >>(l) to move it to Settings applied; click Up to move the Date and Time to the first position 

      2. Beneath Page Counter: Start with 1, check off Reset to initial value after each scan(X) 

      3. Beneath Date and Time: Format=yyyymmdd, check off Add time, Date/time separator= ”-“ (Hyphen)

      4. Change Character string1: “_” (underscore)

   5. The Name Rule settings should then look like this:

      Image RemovedImage Added

4. In Job Profile Name, enter Multi Page Single Sided

   1. Change file format to Multipage Tagged Image File Format (*.tif)

      

   2. Change scan type to ADF (front side)

      

   3. Ensure Separate per is unchecked

      

   4. Adjust the Name Rule settings listed below step 3

5. In Job Profile Name, enter Singles

   1. Change file format to Tagged Image File Format (*.tif)

      

   2. Change scan type to ADF (front side)

      

   3. Ensure Separate per is unchecked

      

   4. Adjust the Name Rule settings listed below step 3

6. In Job Profile Name, enter Double Sided Single Document

   1. Change file format to Multipage Tagged Image File Format (*.tif)

      

   2. Change scan type to ADF (Duplex)

      

   3. Ensure Separate per is checked and enter the number 2

      

   4. Adjust the Name Rule settings listed below step 3

...