...
- Avoid using 0402 or similarly sized components (for reference, 0402 components are about 0.1mm x 0.05mm). Do NOT use 0201 components
- Footprint name should include package name and package dimensions in mm if part is an IC
- Correct pad sizes and locations
- Corner radius for pads should be 15%
- Pads included on Top Layer
- Silkscreen included on Top Overlay layer
- Nothing included on the Mechanical 1 layer except for 3D body
- Pin 1 designator included on silkscreen (Top Overlay) if applicable
- 3D Body of the footprint added (may be exempted if unable to find one)
...