The instructions in this article will work for Chrome, Firefox and Internet Explorer web browsers.

...

Included in this article:

• Video instructions

• How to install

• How to connect

• Confirm VPN connection

• Settings at a glance

Video instructions

...

How to install

1. To begin, log into the VPN with your-character UWaterloo username (e.g. j25rober)  and password

   • Most can use https://cn-vpn.uwaterloo.ca/+CSCOE+/logon.html, but depending on where you are on campus, you may need to use https://vpn-inside.private.uwaterloo.ca. 
     

     

     
     a.     Before accessing the installation file, you will be asked to log in using your 8-character UWaterloo username (e.g. j25rober), password and second password. The second password is used to authenticate your DUO account.
     
     Second Password:

     • Type push for Duo Mobile push; enter ‘push2’ to receive the prompt on a secondary device, ‘push3’ to receive the prompt on a tertiary device, etc.

...

• Type sms for text codes; you will get a text message with 10 codes. Re-enter your password, and type the first code in the second password field.

• Type phone to get a phone call; enter ‘phone2’ to receive the prompt on a secondary device, ‘phone3’ to receive the prompt on a tertiary device, etc.

• For Duo hardware token or Duo app, enter the 6-digit code from the token or app

• For a Yubikey, touch the YubiKey with your cursor in the text box
  

  b.    Accept the Duo 2FA prompt on your device to continue to the next step.
  

• From the VPN download page shown below, click Download for Windows to download the installation file.

  

• Select Save.
  

• Go to your Downloads folder (via File Explorer) and double-click on the installation file. 
  

• Click Next to start AnyConnect Secure Mobility Client Wizard.
  

• Click Install on the Ready to Install window.
   

• Accept  End User License Agreement  and click  Next .
   

• Click the Finish button.

How to connect

The installation process only needs to be done once. After the client is installed, you can use the "Start Menu" item to access the client connection window.

1. Search for Cisco AnyConnect in the Windows start menu and launch the application. 

2. If you haven't connected before, you will need to specify the VPN server:

   1. cn-vpn.uwaterloo.ca : Accessed from off-campus and from wireless when on-campus

   2. vpn-inside.private.uwaterloo.ca : Accessed from on-campus, wired connections only
      

3. Click Connect. 

4. This brings you to a login window where you can authenticate with your credentials. Under the 'Group' drop-down menu, select 'UW-General-Campus'. 
   Note: 'UW-General-Campus' is the recommended profile. 'UW-Campus' should be used as an alternative profile.

   1. Enter your 8-character username into the username field (i.e. myuserna)
      

      

Duo two-factor authentication (2FA) and the VPN

In the Second Password field, enter one of the following, then click OK.

...

Confirm VPN connection

When the VPN client is running, you will see an icon in the taskbar notification area (lower right corner of Windows). This can be used to control the VPN connection:

• Right click to close the Cisco AnyConnect client

• Double-click to open the Cisco AnyConnect client
  

Settings at a glance

If you already have the Cisco VPN client installed, you can use the following settings to connect: (Username is your 8-character username, e.g. j25rober)

• Server/connect to address: cn-vpn.uwaterloo.ca

• Username: 8-character username

• Password: password

Related articles

...